Wolfbite Bed Adhesion Solution (Original Formula)
- 3D Printer Adhesive Prevents Parts From Warping
- Easy to Apply
- Helps bond ABS, PETG, TPU, and TPE filament to heat bed
- Low odor
- 2 and 4 FL. OZ bottle with applicator (yields a minimum of 100 and 200 uses). Clean glass plate and applicator with clean water only. Soap and other cleansers will contaminate Wolfbite solution and cause unstable performance.
- Safety Data Sheet (SDS)
No More 3D Printed Part Warping
Patent-pending Wolfbite is a premium solution specially engineered to bond Acrylonitrile Butadiene Styrene (ABS), Polyethylene terephthalate (PETG), Thermoplastic Elastomer (TPE), and Thermoplastic Polyurethane (TPU) plastic parts directly to a heated glass 3D printing surface without lifting—also known in the industry as “warpage,”—and to enable smooth release of objects after printing. ABS is a preferred material for 3D printing because of its durable nature and options for post processing. However, ABS, PETG, TPE and TPU must be printed on a prepared surface for correct adhesion. A common surface treatment includes applying polyethylene terephthalate (PET) film or Kapton tape to a glass plate and treating the surface with a slurry of dissolved ABS and acetone. After several uses, the film may become damaged, which results in the parts becoming difficult to remove, or lifting off the film.
Wolfbite was reviewed on the show TESTED and found it to be a
“Magic potion worked really well” and a part of your
“Essential tools Kit for 3D printing”
Wolfbite Stops 3D Printed Parts From Warping
Wolfbite 3D Printer Adhesive is applied with an applicator brush straight onto the glass, eliminating the need for PET film or Kapton tape. One light coat of Wolfbite can be used for several prints. After applying Wolfbite, the glass is heated and ABS parts stick firmly to the glass without warpage. Airwolf 3D specially formulated the proprietary solution to not only promote excellent adhesion but also to make part removal easy. Once the 3D printed parts have cooled, they will dismount from the printing surface with minimal effort, leaving a clean and smooth bottom surface. Wolfbite is packaged in a two fluid ounce container and comes with a foam brush applicator. It is currently available for presale at an introductory price of $19.95.
***Clean glass plate and applicator with clean water only. Soap and other cleansers will contaminate Wolfbite solution and cause unstable performance.***
More information is available on our press release
Check out our other 3D Printing Bed Adhesives
Wolfbite for 3D printing with ABS, PETG, TPU, and TPE,
Wolfbite Nano for PLA
Wolfbite Mega for Polycarbonate and PC/ABS
Wolfbite Nitro for superior Nylon Based adhesion.
Wolfbite ULTRA for Polypropylene.
Sign up for our newsletter and we will keep you informed!