WolfBite NITRO (Nylons)
$19.99
Can't get nylon parts to stick to the bed of your 3D printer? Wolfbite Nitro is a premium adhesive solution designed to bond Nylon-based parts to the 3D print bed while printing and allow their smooth release when completed.
Buy More and Save:
Premium Heatbed Adhesion Solution for Nylon Filaments
- Prevents 3D Printed Parts From Warping
- Easy to Apply
- Helps bond Nylon Based filament to heat bed
- Low odor
- Long-lasting
- Available in 2 oz. (50+ print yield) and 4 oz. bottles (100+ print yield)
- Polyurethane Foam Applicator included
- Safety Data Sheet (SDS)
No More Warping of 3D Printed Nylon-Based Parts
Wolfbite NITRO is a premium adhesive solution designed to bond Nylon-based parts to the 3D print bed and to allow their smooth release when completed. Airwolf 3D developed Wolfbite NITRO in cooperation with renowned polymer chemist Dr. Midodrag “Mickey” Micic, Sc.D, Ph.D., M.T.M., who currently serves as department chair and professor at Cerritos College. Together, Airwolf 3d and Dr. Micic developed an adhesion formula that strongly bonds Nylon-based parts to heated glass print beds. Many users discovered the hard way that Nylon material tends to resist adhering to the print bed. This can result in lifting around the edges of a print, commonly known in the industry as “warpage.” The most common method of promoting adhesion between Nylon-based parts and the print bed used to be a combination of PET film and washable glue which many users cited as costly, messy, and just plain inconvenient. Wolfbite NITRO solves all that! With just a single coat of Wolfbite NITRO, users can bond multiple projects to their 3D print beds and cleanly release the objects when they are completed, using water to help release the objects.
Buy Wolfbite NITRO to Prevent Nylon-Based Warpage
Simply spread a thin coat of Wolfbite NITRO over the print bed with the foam brush provided. Just one coat of Wolfbite NITRO is enough to ensure proper adhesion between Nylon Based parts and the glass or ceramic print bed for multiple prints. Each 2 oz. bottle of WolfBite NITRO provides enough adhesive power to yield over 50 prints, and every 4 oz. bottle will yield over 100 prints! The Wolfbite NITRO solution is formulated to produce maximum adhesion while the print bed is hot, and it conveniently relaxes its grip on the 3D printed object as the print bed cools!
Wolfbite NITRO and AXIOM for 3D Printing in Nylon-Based Materials
Wolfbite NITRO is the perfect companion to the all-new AXIOM 3D printer when it comes to printing in Nylon-based materials. The fully enclosed print chamber of the AXIOM provides a thermally stable printing environment for your Nylon-based parts which drastically reduces the likelihood of warpage. When combined with Wolfbite NITRO, Nylon-based parts are bonded so securely to the print bed that the incidence of warpage is virtually eliminated. Together, Wolfbite NITRO and AXIOM make 3D printing in Nylon-based materials a breeze. No more PET tape. No more glue sticks. Wolfbite NITRO is your easy, one-stop solution for 3D printing with Nylon-based filaments.
Wolfbite NITRO Video
Check out our other 3D Printing Bed Adhesives
| Shipping Weight | .2 lbs |
|---|---|
| Shipping Dimensions | 3 × 3 × 4 in |
| Bottle Size | 2 oz, 4 oz |
DIRECTIONS
- Shake well Remove lid and dip foam applicator into solution. (May be necessary to warm bottle for 5-10 seconds max in microwave.)
- Apply by painting on cold glass with long strokes, covering the entire build area.
- Place glass onto heatbed and preheat. Place glass onto heatbed and preheat to 60-80C
ADDITIONAL TIPS
- Clean glass plate and applicator with clean water only. Soap and other cleansers will contaminate Wolfbite solution and cause unstable performance.
- To remove excess formula, razor blade may be used to gently scrape the glass plate under running water. Please exercise caution.