Wolfbite Mega Bed Adhesion Solution
- Premium Heatbed Adhesion Solution For Polycarbonate and PC-ABS
- Prevents 3D Printed Parts From Warping
- Easy to Apply
- Helps bond Polycarbonate and PC-ABS filament to heat bed
- Low odor
- Available in 2 oz. (50+ print yield) and 4 oz. bottles (100+ print yield). Clean glass plate and applicator with clean water only. Soap and other cleansers will contaminate Wolfbite solution and cause unstable performance.
- Polyurethane Foam Applicator included
- Safety Data Sheet (SDS)
No More Warping 3D Printed Polycarbonate Parts
Wolfbite MEGA is a premium adhesive solution designed to bond Polycarbonate and PC-ABS parts to the 3D print bed and to allow their smooth release when completed. Airwolf 3D developed patent-pending Wolfbite MEGA in cooperation with renowned polymer chemist Dr. Midodrag “Mickey” Micic, Sc.D, Ph.D., M.T.M., who currently serves as department chair and professor at Cerritos College. Together, Airwolf 3d and Dr. Micic developed an adhesion formula that strongly bonds Polycarbonate/PC-ABS parts with their heated glass or ceramic print beds. Many users discovered the hard way that Polycarbonate material tends to resist adhering to the print bed. This can result in lifting around the edges of a print, commonly known in the industry as, “warpage.” The most common method of promoting adhesion between Polycarbonate parts and the print bed used to be a combination of PET film and washable glue which many users cited as costly, messy, and just plain inconvenient. Wolfbite MEGA solves all that! With just a single coat of Wolfbite MEGA, users can bond multiple projects to their 3D print beds and cleanly release the objects when they are completed.
***Clean glass plate and applicator with clean water only. Soap and other cleansers will contaminate Wolfbite solution and cause unstable performance.***
Buy Wolfbite MEGA to Prevent Polycarbonate Warpage
Simply spread a thin coat of Wolfbite MEGA over the print bed with the foam brush provided. Just one coat of Wolfbite MEGA is enough to ensure proper adhesion between Polycarbonate/PC-ABS parts and the glass or ceramic print bed for multiple prints. Each 2 oz. bottle of WolfBite NITRO provides enough adhesive power to yield over 50 prints, and every 4 oz. bottle will yield over 100 prints! The Wolfbite MEGA solution is formulated to produce maximum adhesion while the print bed is hot, and it conveniently relaxes its grip on the 3D printed object as the print bed cools!
Wolfbite MEGA and AXIOM for 3D Printing in Polycarbonate
Wolfbite MEGA is the perfect companion to the all-new AXIOM 3D printer when it comes to printing in Polycarbonate. The fully enclosed print chamber of the AXIOM provides a thermally stable printing environment for your polycarbonate parts which drastically reduces the likelihood of warpage. When combined with Wolfbite MEGA, polycarbonate parts are bonded so securely to the print bed that the incidence of warpage is virtually eliminated. Together, Wolfbite MEGA and AXIOM make 3D printing in Polycarbonate a breeze. No more PET tape. No more glue sticks. Wolfbite MEGA is your easy, one-stop solution for 3D printing with Polycarbonate and PC-ABS.
Wolfbite MEGA Video
Check out our other 3D Printing Bed Adhesives
Wolfbite for 3D printing with ABS, PETG, TPU, and TPE,
Wolfbite Nano for PLA
Wolfbite Mega for Polycarbonate and PC/ABS
Wolfbite Nitro for superior Nylon Based adhesion.
Wolfbite ULTRA for Polypropylene.
Download our Guide "The Key to 3D Printing Large Polycarbonate Parts"
This guide is intended to shed light on many of the methods we have used since 2014 to master polycarbonate printing on the desktop. In particular, we will pay close attention to temperature requirements, bed adhesion, printer configurations, and best settings practices.
Reading time: 15 minutes