UPDATES

Firmware

Genesis Circuit Board is Developed by Airwolf 3D and Exclusively for Airwolf 3D Printers

Version History

  • 1.59.1 – 7/16/2021
    • Added Z offsets to “K” to permit alternative surfaces on build plate
    • Left and right nozzle Z offsets measured to determine levelity
    • X/Y offsets for right nozzle independently adjustable to align colors
  • 1.58.17 – 5/1/2021
    • Improve high-speed merging
    • Offset now adjustable without changing firmware
  • 1.58.14 – 2/17/2021
    • Fixed periodic over extruding
    • Improved X/Y/Z synchronization
    • Finer z offset adjustments
  • 1.58.11 – 11/29/2020
    • Improve auto-leveling accuracy
  • 1.58.9 – 7/17/2020
    • E functionality improved
    • Reduce current settings
  • 1.58.8 – 2/21/2020
    • Z probe only active when nozzle is auto-leveling
    • Side fans modulate if extruder temp lowers more than 4 degrees
    • Spread cycle added to quite down printer
  • 1.58.7 – 8/13/2019
    • EVO R added
  • 1.58.1 – 11/12/2018
    • Control algorithms improved
    • EVO 22 added

ALL SOFTWARE UDPATES