Category Archives: Uncategorized

Complementary Training at Airwolf 3D

Did you know Airwolf 3D offers a 3D printing workshop for beginners? With a few quick clips, Airwolf 3D engineer Cameron Williams readies ABS filament before feeding it into the extruder of the HD2X 3D printer. A group of hearing aid designers watch intently, peppering his lecture with questions regarding filament widths and heat settings. […]

I Have Entered An Entry in the White House 3D Printed Ornament Design Challenge 2014

Thank you for participating in the White House 3D Printed Challenge!  After you have entered your entry on the instructables website, please come back to fill out our form below. Fill out my Wufoo form! Use Wufoo integrations and get your data to your favorite apps. Thank you for participating in the White House 3D […]

Nylon Filament Printer – AW3D Nylon 3D Printing

Nylon 3D printing….It’s cheap, it’s strong, and it’s self-lubricating. What else do you want in a 3D printing material? AW3D HD2x is the perfect solution for a nylon filament printer. Here at Airwolf, we believe we have the best nylon filament printer on the market. Nylon has been used for years, and has just recently […]

Inside Sales Representative(s) – Airwolf 3D

3D prints

Inside Sales Representative at Airwolf 3D (Costa Mesa). Must have experience with CAD software (Solidworks, Sketchup, AutoCad or other similar program) JOB SUMMARY: Sell Airwolf 3D printers, accessories and filament to end-user customers through inbound and outbound calling, email, in-house demonstration and local outbound sales initiatives. COMPENSATION: $600/week + aggressive commission and bonus plan Qualified […]

New WOLFBEND TPU 3D Printing Filament!

Airwolf 3D is proud to announce WOLFBEND TPU 3D Printing Filament! The days of struggling with 3D printing flexible filaments are finally over. Airwolf 3D’s new WOLFBEND TPU 3D printing filament is not only the most user-friendly flexible material on the market, but also the strongest. Have you ever wanted to print some handle bar […]

Airwolf Quick Release Latch for 3D Printer

Introducing the Airwolf Quick Release Latch.  This new xtruder part eliminates the need to “chase” those little washers on the extruder every time you are closing the pivoting member.  You also do not have to readjust the tension between filament changes.  It makes changing filament a snap! This is standard on all 3D printers since 09/22/2012.  If […]

Press Release: Introducing A Desktop 3D Printer Starting at $1,695

What Is An Airwolf 3D Printer? Airwolf 3D introduces a new tool for in-house low cost prototyping, the AW3Dâ„¢.  The Airwolf 3D® printer offers high resolution prototyping capabilities, for a fraction of the cost of commercial grade 3D printers.  Our 3D printers generate models from most drafting software, such as Solid Works®  and AutoCAD® to […]

3D Printer User Manual (model AW3D v.4 and v.5)

  INSTRUCTIONS FOR OPERATING YOUR 3D PRINTER – UPDATED 08/24/2012 MANDATORY READING BEFORE OPERATING YOUR AIRWOLF 3D PRINTER THIS 3D PRINTER IS NOT A TOY KEEP OUT OF THE REACH OF CHILDREN AT ALL TIMES   KEEP HANDS AWAY FROM THE HOT END, HEATED BED, BELTS, GEARS, AND POWER SUPPLY AT ALL TIMES UNLESS THE […]