Airwolf 3D Printer Configurations for Repetier Host

Updated on Aug. 8, 2016. To get the best performance out of your Airwolf 3D printer, please download our free APEX 3D Printing Software.

Once you become familiar with your 3D printer and slicing, we highly recommend that you upgrade your host software from Pronterface to Repetier Host. The reasons are simple, more control of prints (speed and flow rate), easy object manipulation and scaling, and easy integrated slicing. Here are the steps to download and setup Repetier Host for your Airwolf 3d printer:

First, download Repetier Host here: http://www.repetier.com/download/.  Download the latest version so that you get the latest version of Slic3r integrated into the host.

Second, install the software and place a shortcut on your desktop.

Finally, configure Repetier Host for your printer.

For AW3D v.5.5, you’ll want to select “Config” and then “Printer Settings” and use the following settings (Com port will depend on your particular computer):

For “Connection”:

For “Printer”:

For “Printer Shape”:

For AW3D XL, you’ll use the following settings:

For “Connection”:

For “Printer”:

For “Printer Shape”:

in SlicingWorking With 3D Models