Airwolf 3D Printers http://airwolf3d.com Making and Selling the Best 3D Printer Mon, 17 Jun 2013 19:53:17 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.1 July 2013 3D Printer Training by Airwolf 3D Weekend Course: From Concept To Prototype – Turning your ideas into Physical Models http://airwolf3d.com/blog/2013/06/12/july-2013-3d-printer-training-physical-models/ http://airwolf3d.com/blog/2013/06/12/july-2013-3d-printer-training-physical-models/#comments Wed, 12 Jun 2013 17:32:49 +0000 Airwolf3D http://airwolf3d.com/?p=5176 3D Printer Training:  Learn About Modeling for 3D Printing, Operate a Desktop 3D Printer and Make Your Own Prototype Over the Weekend – In sunny Southern California. Do you have an idea that you want to make into a prototype? Do you want to quickly learn how to effectively operate a 3D printer but don’t [...]

The post July 2013 3D Printer Training by Airwolf 3D Weekend Course: From Concept To Prototype – Turning your ideas into Physical Models appeared first on Airwolf 3D Printers.

]]> 3D Printer Training:  Learn About Modeling for 3D Printing, Operate a Desktop 3D Printer and Make Your Own Prototype Over the Weekend – In sunny Southern California.

3d printer class setting

Do you have an idea that you want to make into a prototype? Do you want to quickly learn how to effectively operate a 3D printer but don’t want to spend months reading and then waste valuable time learning through trial and error? Then this intensive 2 day course may be the answer.  Get hands-on 3D printer training and walk away with

To see the full content, share this page by clicking one of the buttons below

The post July 2013 3D Printer Training by Airwolf 3D Weekend Course: From Concept To Prototype – Turning your ideas into Physical Models appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/06/12/july-2013-3d-printer-training-physical-models/feed/ 0 So Many 3D Printer Materials – So Little Time http://airwolf3d.com/blog/2013/06/10/many-3d-printer-materials/ http://airwolf3d.com/blog/2013/06/10/many-3d-printer-materials/#comments Mon, 10 Jun 2013 06:07:29 +0000 Airwolf3D http://airwolf3d.com/?p=5101 Eight Different 3D Printer Materials For Use with Airwolf 3D Printers   Airwolf 3D printers can print with a multitude of materials. New materials are appearing on the market often. Below is a sampling of some of the 3D printer materials successfully tested.                     Table of [...]

The post So Many 3D Printer Materials – So Little Time appeared first on Airwolf 3D Printers.

]]> Eight Different 3D Printer Materials For Use with Airwolf 3D Printers

3D printer materials xl 3D printer final

Airwolf 3D printers can print with a multitude of materials. New materials are appearing on the market often. Below is a sampling of some of the 3D printer materials successfully tested.

                    Table of 3D Printer Materials

3d printer materials ABS  ABS

Acrylonitrile

To see the full content, share this page by clicking one of the buttons below

The post So Many 3D Printer Materials – So Little Time appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/06/10/many-3d-printer-materials/feed/ 0 Download Free File of 3D Print Cover for Power Supply for your 5.5 3D Printer http://airwolf3d.com/blog/2013/06/10/download-free-file-3d-print-power-supply-cover/ http://airwolf3d.com/blog/2013/06/10/download-free-file-3d-print-power-supply-cover/#comments Mon, 10 Jun 2013 01:34:01 +0000 Airwolf3D http://airwolf3d.com/?p=5077 It’s a Snap!  Cover Up Unsightly Terminals  on Your 3D Printer’s Power Supply Just 3D print and snap on! This is derived from a 12 Volt Power Supply Cover design by “Beekeeper” on http://www.thingiverse.com/thing:40377 AW3D V 4.5, 5, 5.5  

The post Download Free File of 3D Print Cover for Power Supply for your 5.5 3D Printer appeared first on Airwolf 3D Printers.

]]> It’s a Snap!  Cover Up Unsightly Terminals  on Your 3D Printer’s Power Supply

Just 3D print and snap on!

This is derived from a 12 Volt Power Supply Cover design by “Beekeeper” on http://www.thingiverse.com/thing:40377

download free file 3d print download free file 3d print

download free file 3d print

AW3D V 4.5, 5, 5.5

Use Caution- Please make sure that your power supply is disconnected from power source and from your 3D printer before
To see the full content, share this page by clicking one of the buttons below

The post Download Free File of 3D Print Cover for Power Supply for your 5.5 3D Printer appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/06/10/download-free-file-3d-print-power-supply-cover/feed/ 0 Orange County 3D Printer Company Has Moved to Costa Mesa California http://airwolf3d.com/blog/2013/06/09/orange-county-3d-printer-new-location/ http://airwolf3d.com/blog/2013/06/09/orange-county-3d-printer-new-location/#comments Sun, 09 Jun 2013 21:47:33 +0000 Airwolf3D http://airwolf3d.com/?p=5042 Airwolf3D, Orange County Manufacturer of 3D Printers, Moves to Costa Mesa, CA To accommodate exponential growth experienced over the past year, Airwolf3D, a manufacturer of desk-top 3D printers, has moved to a new facility in Costa Mesa, CA.  Located at 3176 Pullman Street, #121, the facility includes a factory showroom, conference and training room, warehouse [...]

The post Orange County 3D Printer Company Has Moved to Costa Mesa California appeared first on Airwolf 3D Printers.

]]> Airwolf3D, Orange County Manufacturer of 3D Printers, Moves to Costa Mesa, CA

To accommodate exponential growth experienced over the past year, Airwolf3D, a manufacturer of desk-top 3D printers, has moved to a new facility in Costa Mesa, CA.  Located at 3176 Pullman Street, #121, the facility includes a factory showroom, conference and training room, warehouse with manufacturing and packaging stations, and offices.  In July, Airwolf 3D will host an open house for members of the Orange County 3D Printer Meet-Up Group and other interested individuals.  More information about this upcoming event will be posted in the Airwolf3D newsletter available at airwolf3D.com.

Orange County 3D Printer Manufacturer

Airwolf3D

To see the full content, share this page by clicking one of the buttons below

The post Orange County 3D Printer Company Has Moved to Costa Mesa California appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/06/09/orange-county-3d-printer-new-location/feed/ 0 3D Printing Training by Airwolf 3D Weekend Course: From Concept To Prototype – Turning your ideas into Physical Models http://airwolf3d.com/blog/2013/05/13/airwolf-3d-to-offer-3d-printing-training/ http://airwolf3d.com/blog/2013/05/13/airwolf-3d-to-offer-3d-printing-training/#comments Mon, 13 May 2013 07:45:58 +0000 Airwolf3D http://airwolf3d.com/?p=4925 3D Printing Training:  Learn About Modeling for 3D Printing, Operate a Desktop 3D Printer and Make Your Own Prototype Over the Weekend – In sunny Southern California.   This class is full.  A new class has been scheduled for July 27th and 28th. Do you have an idea that you want to make into a [...]

The post 3D Printing Training by Airwolf 3D Weekend Course: From Concept To Prototype – Turning your ideas into Physical Models appeared first on Airwolf 3D Printers.

]]> 3D Printing Training:  Learn About Modeling for 3D Printing, Operate a Desktop 3D Printer and Make Your Own Prototype Over the Weekend – In sunny Southern California.

3D PRINTING TRAINING  This class is full.  A new class has been scheduled for July 27th and 28th.

Do you have an idea that you want to make into a prototype? Do you want to quickly learn how to effectively operate a 3D printer but don’t want to spend months reading and then waste valuable time learning through trial and error? Then

To see the full content, share this page by clicking one of the buttons below

The post 3D Printing Training by Airwolf 3D Weekend Course: From Concept To Prototype – Turning your ideas into Physical Models appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/05/13/airwolf-3d-to-offer-3d-printing-training/feed/ 0 Presenting 3D Printing at IEEE Silicon Valley http://airwolf3d.com/blog/2013/05/12/institute-of-electrical-and-electronics-engineers-3d-printing/ http://airwolf3d.com/blog/2013/05/12/institute-of-electrical-and-electronics-engineers-3d-printing/#comments Sun, 12 May 2013 21:15:13 +0000 Airwolf3D http://airwolf3d.com/?p=4902 Erick Wolf will present 3D Printing to the Institute of Electrical and Electronics Engineers Santa Clara Valley Consumer Electronics Society May 28 Meeting Notice a Free Event for all IEEE Members – Sponsored by Subject: 3D Printing – Prototype to pilot line in your office Speaker(s): Erick P. Wolf, Esq., President – Airwolf 3D New Venue [...]

The post Presenting 3D Printing at IEEE Silicon Valley appeared first on Airwolf 3D Printers.

]]> Erick Wolf will present 3D Printing to the Institute of Electrical and Electronics Engineers Santa Clara Valley Consumer Electronics Society

May 28 Meeting Notice
a Free Event for all IEEE Members – Sponsored by

Subject: 3D Printing – Prototype to pilot line in your office
Speaker(s): Erick P. Wolf, Esq., President – Airwolf 3D

New Venue

Microsoft Silicon Valley
1085 La Avenida St., Mountain View, CA
BizSpark Lab, Building

To see the full content, share this page by clicking one of the buttons below

The post Presenting 3D Printing at IEEE Silicon Valley appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/05/12/institute-of-electrical-and-electronics-engineers-3d-printing/feed/ 0 3D Printing: Is the Law Ready for the Future? http://airwolf3d.com/blog/2013/05/12/3d-printing-is-the-law-ready-for-the-future/ http://airwolf3d.com/blog/2013/05/12/3d-printing-is-the-law-ready-for-the-future/#comments Sun, 12 May 2013 20:52:09 +0000 Airwolf3D http://airwolf3d.com/?p=4889 Event topic is 3D Printing and the Law. Erick Wolf will be presenting at this Stanford Law School event. Details May 16, 2013 Room 290 RSVP is required for this free event. 12:50pm-2:00pm – Panelist Discussion 2:00om-3:00pm – 3D Demo This event will be livestreamed and posted on  Youtube channel. Three dimensional printing turns bits into [...]

The post 3D Printing: Is the Law Ready for the Future? appeared first on Airwolf 3D Printers.

]]> standford law school 3d printer presenter

Event topic is 3D Printing and the Law.

Erick Wolf will be presenting at this Stanford Law School event.

Details

May 16, 2013

Room 290

3d printing and the law

RSVP is required for this free event.

12:50pm-2:00pm – Panelist Discussion
2:00om-3:00pm – 3D Demo

This event will be livestreamed and posted on  Youtube channel.

Three dimensional printing turns bits into atoms. The technology is simply amazing. These machines draw on programming, art and engineering to enable people to design and build intricate, beautiful, functional jewelry,

To see the full content, share this page by clicking one of the buttons below

The post 3D Printing: Is the Law Ready for the Future? appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/05/12/3d-printing-is-the-law-ready-for-the-future/feed/ 0 Notes from 3D/DC 2013 http://airwolf3d.com/blog/2013/05/05/notes-from-3d-dc-2013/ http://airwolf3d.com/blog/2013/05/05/notes-from-3d-dc-2013/#comments Sun, 05 May 2013 08:21:40 +0000 Airwolf3D http://airwolf3d.com/?p=4844 Back from 3D DC 2013 As some of you may know, the Airwolf 3D team recently attended the 3D/DC event in Washington, D.C.  Here is our report from this interesting journey: We had the honor of setting up an Airwolf 3D printer (AW3D XL)  to display at the Rayburn House Office Building (RHOB).  We presented the [...]

The post Notes from 3D/DC 2013 appeared first on Airwolf 3D Printers.

]]> Back from 3D DC 2013

As some of you may know, the Airwolf 3D team recently attended the 3D/DC event in Washington, D.C.  Here is our report from this interesting journey:

We had the honor of setting up an Airwolf 3D printer (AW3D XL)  to display at the Rayburn House Office Building (RHOB).  We presented the technology to members of Congress, their staffers and the public.  A great big thank you goes out to the staff at Public Knowledge for putting together this insightful event.

At the event, we observed first-hand as Dr. Jordan Miller 3D printed sugar molds for cellular growth.  Which by the way, was

To see the full content, share this page by clicking one of the buttons below

The post Notes from 3D/DC 2013 appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/05/05/notes-from-3d-dc-2013/feed/ 0 Growing Living Tissues With 3D Printed Sugar Molds http://airwolf3d.com/blog/2013/05/05/growing-living-tissues-with-3d-printed-sugar-molds/ http://airwolf3d.com/blog/2013/05/05/growing-living-tissues-with-3d-printed-sugar-molds/#comments Sun, 05 May 2013 06:44:47 +0000 Eva Wolf http://airwolf3d.com/?p=4830 3D Printed Sugar Molds Improve Living Tissue For those of you with the Airwolf 3D Printer  - XL Model, did you know that the RAMBo circuit board on your 3D printer has an interesting back story?  It involves 3D printed sugar molds and chocolate. Jordan Miller of the University of Pennsylvania and Hive76 helped to develop [...]

The post Growing Living Tissues With 3D Printed Sugar Molds appeared first on Airwolf 3D Printers.

]]> 3D Printed Sugar Molds Improve Living Tissue

For those of you with the Airwolf 3D Printer  - XL Model, did you know that the RAMBo circuit board on your 3D printer has an interesting back story?  It involves 3D printed sugar molds and chocolate.

Jordan Miller of the University of Pennsylvania and Hive76 helped to develop with circuit board. In fact, Jordan came up with name for RAMBo. Dr. Jordan uses a RAMBo circuit board on his printer, to print 3D sugar molds for cellular growth.  Recently, our staff was onsite at the 3D/DC event in Washington D.C. and observed, first-hand, the precise

To see the full content, share this page by clicking one of the buttons below

The post Growing Living Tissues With 3D Printed Sugar Molds appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/05/05/growing-living-tissues-with-3d-printed-sugar-molds/feed/ 0 3D Printer Presentation to So Cal Section of the American Association of Physics Teachers SCAAPT http://airwolf3d.com/blog/2013/04/20/scaapt/ http://airwolf3d.com/blog/2013/04/20/scaapt/#comments Sat, 20 Apr 2013 21:27:52 +0000 Airwolf3D http://airwolf3d.com/?p=4915 Southern California Section Invited talk: Erick Wolf, airwolf3d.com -  3D Printers: How they work, Why your classroom needs one, and How you can afford it Program for the Spring 2013 meeting   DATE AND PLACE  Saturday, April 20th Santa Monica College  Science BuildingLocal Host: Nuria Rodriguez

The post 3D Printer Presentation to So Cal Section of the American Association of Physics Teachers SCAAPT appeared first on Airwolf 3D Printers.

]]> AAPT 3d printer
Southern California Section

Invited talk: Erick Wolf, airwolf3d.com -  3D Printers: How they work, Why your classroom needs one, and How you can afford it

Program for the Spring 2013 meeting

 

DATE AND PLACE 
Saturday, April 20th
Santa Monica College 
Science BuildingLocal Host: Nuria Rodriguez

The post 3D Printer Presentation to So Cal Section of the American Association of Physics Teachers SCAAPT appeared first on Airwolf 3D Printers.

]]> http://airwolf3d.com/blog/2013/04/20/scaapt/feed/ 0